Mouse Traps Laid

After much frustration trying to figure out why my character was not taking damage from the mouse traps I finally got the problem solved with some help from Unity Answers. In the end I still do not know why he was not taking damage from the mouse traps because apart from not having a character controller the mouse traps are set up the same way as enemy characters, they each have a collider object set as a trigger which tells the character (Bud)'s "Hurt Collider" to take damage to the players health. now you would think that would be simple right? but nope, it was just NOT working for some unknown to me reason. Well it's fixed now by going a slightly different route in the Mouse Traps script.

So now the traps are functioning as they are supposed to and Bud gets a nasty 25 point damage if he trips one of these pesky things. The good thing is, is that if there is a ball near by Bud can push the ball so it rolls over a mouse trap and that will set it off, no more mouse trap problem because once a trap is tripped it's no longer a threat. I've placed two traps in the Tree House, I might place one more but not sure where yet, perhaps on the upper lookout deck.

Note: I tried today to see if I could drop the robot off of the Tree House look out deck so I would be able to do a screen capture of the robot exploding as he drops to the ground but it took me a long time to get it to happen just once and I was not fast enough to get to a good vantage point to quickly hit the print screen button, Oh I say him blow to bits alright but was just not fast enough to hit the capture button. Maybe next time, like I say it's REALLY thrown in as a "What if" factor and tricky to do, but it can be done and he explodes real nice too. I used the Big explosion with the fragments from the "Detonator pack" so it's really cool to watch ;)

Mouse Traps

"Bud the Spud" has a new game item to watch out for, "Mouse Traps." There will be a few of these in the Tree House in level 03 for Bud to have to avoid. I'm going to place one of these along the path the toy wind up robot patrols inside of the Tree House because getting past that robot is still way too easy and needs another dangerous obstacle just to make it less easy to just dodge by the robot. I've not really decided on the damage amount these pesky things will dish out if bud accidentally runs into one. I'm thinking a good 25 should be pretty fair, but I'll make it a variable so I can change it easily in the inspector in Unity 3D's editor.

When I was designing the mouse trap I thought about going with the classic "Victor" mouse traps but did not want any recognizable company names used so instead I came up with "Snag Em" mouse traps, a non existent company I dreamed up just for this purpose. Do you like the "Snag Em" logo ;)

Bouncing Balls and Robot Death

I kept thinking today when I was out fro my bike ride that my new space toy ball was missing something, but what was it, and then around the 5 mile mark it hit me, "My ball need sound and a bounce ability" which it was lacking. So after i got home I worked on giving the ball some bounce using the physics bounce material and playing around with the settings. Then I added the sound effect for when the ball bounces.

Next was the Toy robots in the Tree House. Now it's not likely that you can get the one inside of the Tree House to fall out and to the ground below but the one on the upper look out deck it is possible using the ball to force the robot to walk off of the edge or fall through the hole in the floor. I wish I could show you a sweet screen capture of the toy robot falling and then exploding with a nice robot exploding sound effect but it's very tricky to do and more sort of thrown in as the "What if" factor ;) Maybe over the course of game testing if I come up with sure fire method of dispatching the robot out of the Tree House I'll capture a video clip and upload it to my YouTube and then post it here ;)

Bud Spud And Toy Space Ball

A video clip showing "Bud the Spud" pushing the toy space ball found in the Tree House in level 03. The ball serves the purpose of partially hiding the hole in the floor on the upper look out deck of the Tree House that Bud must drop down through in order to find the 2nd key to unlock the door to the next level.

I think I need to adjust the size of his "Push Collider" as I can see his head cuts into the ball a little. At least I think that will solve the issue minor as it is.

LATE UPDATE: I adjusted the size of his push collider and it did not make a difference, I thought for sure it would, maybe what I need to do is give his body and actual mesh collider? I just hope that does not much with his other colliders, I'll test it and see if it works.

Buds new Pushable Toy Ball

OK I've got the toy space ball placed into my scene in the Tree House as you can see. Now the ball is serving a good purpose to partially hide the hole in the floor that Bud will need to drop down in order to find the 2nd key he needs. I also placed an extra life heart on top of the 2nd wooden apple box on top of the one you see here, you'll know when extra life hearts are near by by the sound of the beating heart, that's your clue that one is close.

So with that little job out of the way now I just need to work on the ground level stuff for Bud the Spud to deal with, fix up some of the terrain texture, perhaps add another challenge, workout the level exit for this level and then I think I'll be basically done with level 03, although I do want to tweak the scenario with the wind up toy robot inside of the Tree House as I still feel he is too easy to avoid. I'm not really sure what to do about that yet.

A New Ball For Bud to Push

You might recall from an earlier post that I was wanting to do something on the upper look out deck of the Tree House to make things more challenging. You might recall me mentioning that Bud the Spud will need to drop through a hole in the floor in order to land on one of the tree branches below in order to find one of the keys needed to unlock the door to the next level. Maybe, maybe not, but anyways yes that was something that had been rattling around in the back of my head. So what I figured was to place a new ball for Bud to have to push out of the way from over top of the hole in the floor. I figure it will give him something he need to do along with watching out for the sparking wind up toy robot that patrols back and forth across the floor. So I've made a new space toy ball for that very purpose. Why is it sometime the simplest models take a long time, the model is just a sphere I made in Max 8, what could be simpler right, even making the Unwrap UVW template was supper simple, but texturing it in Photoshop is what REALLY vampired my time. As you can see it's no simple map, the seems had to match up just right. But oh well, it's done now so all I have to do is export it to FBX and import that into Unity 3D and make it work the same way the "Soccer ball" from level 2 works, no biggie I'll be done that lickedy split ;)

Bud the Spud With Jack in a Box

After a fair amount more tweaking my initial problem with the weird "Flipped Normals" of my FBX import from Max 8 into Unity 3D still unsolved I found a somewhat workable/not too bad solution (by no means permanent). What I did was use a "Transparent/Cutout/DiffuseBack" shader which I'm sure is WAY more complicated than what I actually need but at least it's showing my "Jack in a Box" head to look somewhat normal. I still have the point light inside of it tough. When I saved it into a prefab and dropped it into my Tree House scene I had to dial back the point light's intensity quite a bit but as you can see here it looks not too bad since I can't light map dynamic objects. I did however light map the tin box, lid, hinge and front tab so at least those parts appear to cast and receive shadows from the rest of the environment.

This will do until I can find a more permanent solution to the stupid "Normals being flipped" issue.

Jack in a Box re Texturing

I figured I might as well get right to it and re texture map the "Jack in a Box" with new maps that I can use. I still pulled some google images to use as a basis for my maps but I gave them a jolly good reworking in Corel Painter so now they are original enough for me to be able to use and redistribute with my model. In some way it was kind of a shame as I had grown quite fond of the maps I was originally using but I'm very satisfied with these, they have a more hand painted look and I tried to keep the overall painting style consistent, it also gave me a chance to fix up some areas of the texture map that I was not 100 percent happy with from the first batch of textures I was using.

I'm still having that freaking import issue from Max 8 into Unity 3D with it buggering up my head of my Jack in a Box and flipping the normals in a very weird way that it also affect the direction the light hits the head part of the model as well... really do not know how to fix that. But last night I did a little experimenting and I found that if I use the Nature soft occlusion leaves material, (it's the wrong texture I know but the only one I could think of that was double sided), tweak the setting and place a point light inside of the head that I can make it look somewhat passable if I have too... but I would rather that the Fracking problem fixed. After this post it will be some more searching on the web to see what I can find out from anyone else who is suffering from the same stoooopid issue... C'mon Unity Fix your Fracking Software!! 

unity 3d Jack In a box Test

Just a quick test in Unity 3D of my Jack in a box. As you can see the Normals in the head are all screwed up, everywhere else on the model, perfect, but the head for some reason Unity 3D is giving me serious grief over. I've got the code all done as you can see and the box works great! "Bud the spud" bumps into the box, it makes a clunk sound and then the box collider gets set to false so that way he does not accidentally start the animations playing twice, then the crank animation and old music box sound plays and then up pops the creepy looking clown with a creepy giggle. Bud will see the note from the "Rotten Potato" pinned to the clown. I'm more than likely going to change the clown pictures on the box but for now they will do. Changing the texture maps will not affect the functionality of the box so that will be no problem. I just wish I can figure out what is wrong with my clown's head in Unity 3D, I would have been done this ages ago but I've been Fracking with it all day trying to figure out why it's not importing properly.

Max 8 to Unity 3D Normals Problem

OK I've run into this before a few time and the usual way it's fixed is to go back into Max 8 and select the parts that are causing the problem and click on polygons and select all and then flip them and re import the model back into Unity 3D. But this time it's not working!!

Here you can see in the "Preview pane" (Lower right hand corner) that the model looks fine but in the scene view (Upper Left Hand corner) you can see that the "Normals" are "Flipped" not only are they flipped but they are catching the light wrong too!! WTF, this must be another fine Unity bug in the latest version.
I've tried reimporting the model several different ways even just dragging in the native Max 8 file and nothing seems to be fixing this rather annoying problem. I tried flipping the normals on the head in Max 8 and re Unwrap UVW mapping the head again to no avail?? I've been at this all day trying to figure it out.

Jack In a Box Animation Test

A test animation of my "Jack in a Box" 3D model. In this video the crank only turns once, this is because in Unity 3D what I will do is split my animations up into 3 separate segments so that way I can code it so as when Bud the Spud bumps into the Jack in the Box the hand crank will start and loop for as long as an specific audio clip will play for and then I'll code it so as the box then plays the open and popping out of the clown puppet part of the animation, hopefully with appropriate sound effects to match.

I'll probably make a few more additional tweaks to the animation tomorrow before exporting it into Unity 3D.

Jack in a Box WIP II

OK we have our rather disturbing looking "Jack in a Box" 3D model completed. Now all I have to do is rig it for animation so that way when "Bud the Spud" either bumps into or gets within a certain distance, right now I'm leaning more to the actual bumping into because I'm thinking it more justifies the sudden unwinding of the "Jack in a Box", the box will spring open and give Bud a nice surprise, albeit a grim surprise with the note pinned to the disturbing looking clown from the "Rotten Potato."

I'm hoping to get the character rigging done today so that way I can either work on his animations later today or early tomorrow morning. It took me some time to try and find some google images of sinister looking clowns the dress up the box with, hopefully I can use the images in this circumstance, if not I'll just have to create my own, a pain in the ass but if I gotta then I gotta, no biggie. lol

Jack in a Box WIP

A sneak peek at the "Jack in a Box." This will be one of the first real clues for "Bud the Spud" about the "Rotten Potato." Bud will discover the "Jack in a Box" in the Tree House in level 03. The idea here is to have it so when Bud bumps into the Jack in a box it will automatically play a music box type of sound typical of these types of toys, then suddenly out will pop the Jack in the Box with a note pinned to it saying something like;

"Give up Bud the Spud, there is no hope!"
                                         -The Rotten potato
As you can see I've gone with a sort of twisted or disturbing looking type of Jack in a Box design to help reflect the madness of the "Rotten Potato." After all mass genocide is madness.
but there is hope;

"One Potato can make a difference." ;)

Scenic Details Added

Because bud is a small potato character his surroundings need to reflect this in some way, as you've no doubt noticed that everything is "potato character sized" in my game. In keeping with that in mind I wanted something more added to the terrain to keep that feeling of being a small character in mind, so I made these nice medium poly blades of grass that I can place here and there throughout the various levels that are outdoors and above ground. Here we can see "Bud the Spud" standing amongst some new blades of grass placed close the the base of the Tree House tree base. Thankfully the FBX file is only 175 kilobytes in size so it should not be too big of a deal for me to use a fair amount of them so long as I don't go overboard.

I was looking into how one places mass trees in Unity 3D to see if perhaps performance wise if that might be a better and maybe even more easier way to place these new blades of grass onto my game level terrain but even though I added the model as a new tree mesh it was not painting them onto my terrain for some reason so I don't know why that is, as I say it's a very reasonably sized model at only 175 KB??

Robot Avoidance Testing II

I mentioned earlier today about needing to add something extra along this passageway in order to make getting past the toy wind up robot a little more difficult for Bud the Spud. I went with the kite as a good object because it's long and a good size to lean up against the Tree House wall and rotate it's angle a little to take up space in the passageway making it more narrow and cluttered. The robot is still pretty easy to avoid but if you are not careful you'll get Bud "Zapped!" And since they are just stupid wind up toys don't forget that they dish out quite a bit of punishment which more than makes up for their simple minded nature ;)

Note: In some future blog posts I'm going to introduce game tips like this:

Game Tip 01: You've been trying to jump from rock to rock and sometimes you end up right on the edge of a rock with no where to go, death is certain right? Not always, sometimes you can save Bud if he is too close to the edge of a rock in the middle of a deadly mud bog. Here's how:
Do a extra high jump by jumping twice and pull back on your direction pad (d pad) or [ S ] on the keyboard, while Bud is high in the air he'll actually move backwards a small amount, keep doing this until you have enough rock under you to better maneuver into a good jump position.

Robot Avoidance Testing

As I had mentioned earlier this morning that I had planned to make the first wind up toy robot in the Tree House a bit more of a challenge to avoid. I've since made the trap door as you can see here which serves very well for blocking "Bud's" direction on the one side, I've also added a lot more toy wooden blocks to make the corridor more narrow to traverse. It's still very easy for Bud to avoid the robot though so I think I need to place something else along that wall with the toy blocks, Not sure what though as I'm trying to watch my poly counts because although those toy wooden blocks are fairly small, they do have beveled edges and angled corners as you can see if you look closely at them. So they will add up to be expensive I'm sure if I use too many of them, so far they seem to play with no problems at all in the editor and my Draw Calls are not bad at all so I think I'm doing really OK in that department. But yeah I'm wanting very much to make Bud's avoidance of this robot a lot more of a challenge so as bud will have to time running through the passageway a little more carefully before the robot turns around to walk back down the corridor between the blocks and trap door. I shortened the distance between his auto waypoints so that has helped a lot but I need to make something to place just after the toy blocks... Hmmm maybe an old kite because I can keep that pretty low poly and still have it look good and it might just be big and bulky enough to extend the obstacles along that wall just enough?? There's a thought ;)

Tweakings

Feels like I didn't get much accomplished yesterday even though I was hard at it all day. I downloaded the latest version of Unity 3D because I had read online about "Light Probes" and was very anxious to try them out but it turns out that all the cool new addition they have made to the latest version of unity like built in Path Finding, the Light Probes and a bunch of other cool stuff is all pro. only :( Oh well, at least the software is up to date and hopefully less buggy which will hopefully mean less crashes ;)

Anyways I was mostly making a lot of tweaks after updating Unity, I had to re bake my light maps because the old ones were "FUBAR" for some reason. I was toying around quite a bit in the Tree House trying to make it so the toy wind up robot in the main part of the Tree House is a little bit more of a challenge to pass since he just walks back and forth between two auto waypoints. I placed in some more wooden apple crates and arranged them so as they effectively block off the back part so that way Bud the Spud will have to go past the robot. I need to make an open trap door to use as a wall to also block off the path he must take along the side of the opening in the floor he gets into the Tree House by so that way he will have a more narrow corridor to walk through with the toy wooden blocks on one side and the open trap door on the other with the robot walking back and forth between the two sets of obstructions, and that should do nicely for more of a challenge in the Tree House. Next I'll need to do something similar on the upper deck as that wind up toy robot is just as easy to avoid. I'm not sure what though, maybe another apple crate and toy block arrangement or another type of wooden box that I'll need to make, paint cans or other toys maybe?? I was thinking about a pushable block that perhaps he will have to move out of the way covering the hole in the upper deck floor that he needs to drop through onto the branches below in order to find the 2nd key??

Bump Map & Beast Solution

I don't know if it's a correct solution but it's a solution that works. My problem was this; every time I ran the Beast Light Mapper I would loose my bump map or "Normal Maps" as Unity calls them. Now you can just imagine how very annoying that can be as bump maps I feel are crucial for giving a game a nice look of realism. I searched for hours, days for a solution to this issue figuring I can't be the only one who is having the same issue. Well this person suggested that and this other person said try this as it had worked for them and so on and so and so on, and either they were not explaining entirely well what exactly it was that they were doing or I was just missing something?? In any event nothing no one said was working for me. So today I thought;

"OK, what if after I run Beast I make a new Directional Light and set it at the same position and rotation in the sky and just tell it to be a real time light?"

Well Frack Me Freddy that worked!! As I say I don't know if it's the correct way but it seems to be a way that at least is simple and freaking works!! I had to adjust it's intensity a little but at least I have my specular materials & normal map effects back along with the beast light mapped shadows. HooAh! Now that's what I call a real KISS operation lol

Toy Wooden Blocks Added



I added some toy wooden blocks to the Tree House for bud to use to help avoid the toy wind up robot in the main part of the Tree House. They are more for scenic detail than actual use although I think if I was to make it so the toy robot just patrolled back and forth along this one side of the Tree House then they would serve more of a purpose in helping Bud avoid the robot, maybe I might experiment a bit with that just to make another challenge to overcome in the Tree House. But they turned out very nice and I'm sure I will no doubt find more practical uses for them later on down the road as the game develops.

Testing with Control Pad

I finally broke down and picked up a Logitech Gamepad F310 today because it was on sale and I needed one BADLY to properly test out my game the way the good game gods intended my game to be played and just as I had suspected it plays like a dream with the game pad. I had to get comfortable with it for a quick moment after having been so familiar testing my game with just the keyboard and mouse which is fine too but the game pad F310 with dual joysticks by Logitech works like a dream, so for all you sissies that were bitching and moaning about how hard the character is to control I say Bah! Yur on crack! Get a game pad for PC and rock the Spud!!

Late Update: It took me a little bit of playing around with my new control pad to figure out how to get it to work in the Unity 3D's game editor but it was a lot simpler that I thought so now I can actually test out in the game editor as well as when my game is exported. Very cool!!

More Scenic Details to Level 03

After tweaking my "Toy Wind Up Robots" for Bud to deal with in the Tree House I started adding some scenic details to level 03. Here you can see "Bud the Spud" with an old beat up box of Mashed Potatoes. Needless to say this is a real WTF moment for Bud. I'm actually thinking of him saying something like that first time he comes across a trashed used box of mashed potatoes. Not really sure what the best way to approach that is yet as I only want him to say it the one time, maybe a game object that activates when collided with and then destroys itself once the audio clip has completed might be a way to go here??

Next I added some "Toxic Waste Barrels" to this muddy bog filled area. Here you can see Bud standing on a hill overlooking just one of the piles of dumped toxic waste barrels. I felt the fog was a little too dense so I've adjusted that which means I'll need to go back to level 02 and adjust it there too, Unless I leave it and figure on it being like the fog has lifted a little between levels, might mean I'll need to play with my sun's azimuth as well maybe??

Robot Character Tweaking

I thought I would take a little time today to tweak my Toy Wind Up Robot Character a little more. You see because he is using a projector for his "Blob Shadow Effect" which works very well for characters that are on the ground but because my toy robots are in the Tree House one of the things I noticed when I was testing out my game is that the projector casts the "Blob Shadow Effect" right through the floor of the Tree House and onto not only the tree below but also the ground. On the ground you do not see it very well because it gets wider and more dispersed the farther away in projects, you can see it clearly projecting through the floor of the Tree House. So I thought I would use my old method of a plane under the robot with the "Blob Shadow Effect" as it works better for this character who is above ground level.

I also added a couple of "Point Lights" to his arms with a "Flicker Script" attached so his lightning bolts will have a bit more of a realistic look to them. I'm going to see if I can find a nice sound effect for little electrical discharges to REALLY make him sweet!

We Love Bud The Spud

A little video capture of some of the game play action in my indie game development projects called "Bud the Spud." In this video you can see many of the changes and improvements I have made along the way from level 01. I've improved the blood splat effect using projectors to ignore the static layer so as when my enemy characters pass through the effect it will no longer project on top of them any more. Also it does not project onto the "Fertilizer Pellets" too.
In this video you can see the damage effect that the "Potato Beetles" take when "Bud" jumps on them and their blood spurt effect. Also witness a very unsuccessfully attempt at jumping over on of the "Hibachi BB Q's" and the burning death "Bud" will suffer as a result. Also shows how he starts back at the levels beginning after such a death.

Wind Up Robots Added to the Tree House

It took me a little while to play around with their waypoints but the Toy Wind Up Robots are now on patrol in the Tree House in level 03 of my "Bud the Spud" game. I was having some problems trying to keep the robot on the top look out deck from wanting to walk towards the waypoints in the actual Tree House, I had to do a lot of experimenting moving them around so as they would not be in line with the ones below. After much tweaking and playing around I think I have something workable. The robot in the Tree House walks along 4 waypoints arranged in a sort of box pattern of 3 sides;

_____
|        |
|        |

Sort of like that across the floor of the Tree House. The robot above walks a similar pattern, it took me some tweaking to get it so as he passes very close the hole in the deck that Bud must fall through onto the tree branch below. That way if he's not looking out and takes to long trying to figure out which angle is best to drop down from and is not aware then a sparking wind up robot will zap him.

Wind Up Robot & Other Discoveries

Well I've had quite the busy weekend with all sorts of tweaking going on and trying to figure out new stuff. One thing that had always been bugging me very badly about my blood splats effects was that because I'm using a top down projector to instantiate blood splats whenever my enemies are killed by "Bud the Spud" although it left behind a very nice blood splat effect that formed well against uneven terrain what would happen was if another enemy say was following close behind and would walk through the blood splat the projector would also project that blood splat on top of the enemy which looked very odd. Also when my enemies died and left behind a "Fertilizer Pellet" for Bud to pick up they too would be covered in blood from the instantiated projector, which I did not mind so much, but my other enemies passing through the effect, well that was another matter and did bother me quite a bit. I discovered over the weekend that if I place my game characters onto another layer like the "static" layer for instance and tell my projector to ignore that layer then it works perfectly. I guess I could make a new layer and call it "Characters" for simplicity. But in any event it works so now my projectors no longer cast a blood splat on top of my enemy characters if they pass through a nice gooey looking blood splat on the floor, How cool is that?

Next up was the challenge of creating my "Wind Up Robot" to patrol around in the Tree House for level 03. I wanted to be able to have him wander back and forth between "Auto Way Points" but I also wanted him to emit sparks that can hurt Bud if he gets hit by them... you might recall me mentioning that was my goal? Well it took me the better part of the day to get it working but I finally got it just how I want it using the "Walker Boys AiPatrol Script." I had to make some changes like "Tag" robot with a name; "robot" and then in the "Controller Collider Hurt Script" I had to add a few if statements and add a few Variables to the "Ai Patrol Script" and Viola! Success!

That particle effect for his sparking lightning bolts was fun too, I might tweak it a little more to add a secondary effect for a small shower of sparks to accompany the lightning bolts, I'll see ;) But what I've got works very well and now I have a walking wind up toy robot that will patrol and inflict damage, he does not attack Bud deliberately as he is simply a wind up toy but he'll dish out a good 35 damage which more than makes up for his lack of intelligence ;)

Level 03 Developments

I've had some good stuff happen today and I've had a lot of frustrations as well. First off I spent a good deal of the day today trying to figure out why every time I baked my light maps using the Beast light mapper in Unity 3D that all of my materials that are being effected by the light maps seem to loose not only their specular properties but also the Bump mapping or "Normal Maps" as Unity calls them get lost, deactivated or no longer seem to have the desired effect?? I spent a lot of time searching for an answer to that problem and I think it's just another one of those if you want light maps and bump maps it's a Pro Only feature... another way to stick it to us struggling artist who are desperately trying to accomplish something half descent on a next to nothing budget Grrrrr. Maybe I'm wrong but none of the answers I managed to find so fare point otherwise :(

I did however FINALLY manage to figure out how to get that blasted lens flare effect for the sun. That was another thing I thought certain was a pro only feature. So I'm somewhat happy that I can do that cool effect at least.

I did a lot of playing around with lighting today using Beast, adjusting my directional light and playing around with my setting trying to see if I can get my level lighted nice before I go too nuts adding all the other stuff into the level. Here you can see "Bud the Spud" standing on the top lookout of the Tree House with that nice sunlight lens flare behind him. I added some more trees, rocks and some bushes to the terrain and placed in an extra health pickup just to work out his jumps across the rocks to get it and get that part working right. I'm still trying to figure out how to get him to make a tighter turn around for when he is standing on small rocks or branches as this would greatly improve his being able to climb up the ladder boards of the Tree House.

Tomorrow I'll see about getting the "Wind up Toy Robot" happening.

Tree House Placement

Took me a while to add all of the foliage planes to my model and then once I got the model into Unity 3D I had to change each material to the "Big Tree" texture materials in unity manually which took a while as I had to do each one separately and there are close to 200 of them. Then I had to go in and remove their colliders as they are not needed here.

While giving it a testing to see how difficult it would be for "Bud the Spud" to climb up the ladder to get into the tree I found it a bit difficult with just the mesh collider alone so I created a few empty game objects and gave them box colliders, tweaked them into position and scaled them to fit each ladder board. It makes it a lot easier to climb now although once he is at the top of the ladder it a bit tricky trying to jump onto the branch so I may need to make a small wooden board nailed to the tree branch to serve as a place to jump onto just to make that a lot easier because although it can be done it does not feel or look quite right as he kind of lands on the side of the branch which looks a bit awkward. I'll see about making a small extra model that I can just import and place into position and adjust as needed.

I place the 2nd key pick up in the location I wanted for it. You would really have too look for this one which is just what I want a bit of a hunting challenge for my players. But I'll mention a little clue here. On the lookout platform there is a hole in the floor that Bud can drop down through onto branches below ;)

I have to add a lot more decorations and things to do in this level but I'm trying to keep this one as simple as I can, that last level was much larger than I had expected it to be which kind of surprised me because there is not really that much to do in that level.

• Explore it a bit
• Find the two keys
• Pick up a Health pick up
• Pick up a Extra Life pick up
• Kill Worms & Potato Beetles
• Jump over two Hibachi BB Q's
• Use the ball to get on top of the 3rd wall
• Find the exit

See not that much at all. This level it's more get across the mud bogs safely, kill Worms and Potato Beetles, climb the tree into the Tree House and find the two keys, make it the rest of the way across the mud bogs to the exit and you're done level 03 :)

Level 03 Tree House WIP Continued

In continuing with yesterdays post I thought I would keep you up to date on how the Tree House is coming along. I've been busy all day mostly just adding the foliage to the tree. Because it's going into Unity 3D in my game environment I figure I might as well use the "Big Tree Leaves & branches" from the standard terrain assets pack. Because Max does the transparencies a little differently than in Unity I had to make a new reversed transparency map from the alpha channel in the unity "Big Tree Leaves & Branches" PSD files and use that in order the get the same effect you see here in my Max render using "Mental Ray." As you can see I've added some more branches to the tree and started to texture a few of the simple things like the tin roof that only needed a simple box texture mapping. I'll see if I have time to do the UVW texture mapping for things like the tree house parts and the tree trunk but that will depend on how much longer it will take me to add some more foliage to the tree, I still want to fill it out a little more in a few areas, but overall it's coming along nicely I think.

I was trying to think of things one might see in a tree house although I could not think of much outside of a few things like wooden boxes to sit on, an old cable cart for a table, a crude wooden bench, and maybe some comic books. Maybe some toy blocks on the floor and the occasional cola can. I'll have to see if I can search the Internet and see if I get some ideas from there.

Level 03 Treehouse WIP

Here is a sneak peek at the Tree house "Bud the Spud" will have to climb in level 03 of my game. Level three takes place in a muddy bog filled area with a tree house located at the center. Bud will have to fight worms and potato beetles on the way to the tree house along with trying not to fall into deadly mud bog goop, climb up into the tree house and find two keys located inside that will unlock the exit door to this level. Inside of the tree house bud will also have to deal with a few rogue toy windup robots which should be not too much trouble as these robots are only stupid wind up toys that patrol back and forth across the floor, they will however on occasion emit sparks that can hurt Bud if he gets hit by them. Well that's my basic scenario for level three. I figured I'd share a sneak peek at the tree house model's work in progress (WIP) exclusively here on my blog.

Character Control Note: Based on the opinions of some of those who have test played my game I've been looking more closely at the character controller system, I've made a few tweaks, (not yet uploaded) and he seems to have a more tighter control now.

Level 02 Completed!!

Level 02 is basically done, I was hoping over the weekend to have it uploaded to the game test site but I was having some issues with it every time I tried to export the game to a web player. I just don't get the problems, my game is only two levels in size!! What about when it starts getting to around 10 or 20 levels in size?? Are they trying to tell me that the "Indie version of Unity 3D" cannot handle a game bigger than 1 or two levels?!? I just can't see that being the case I think my problem is in the optimization area still, or perhaps in the way I have it set up to handle all of my games assets. Still so much to learn with this stuff.

• First I kept getting an "Out of Memory Unity Editor Host View On GUI ()" error every time I tried exporting my game to a web player.
• Every time I tried to add the mud bog haze particle effect to the mud bogs in level 02 they would act strangely, they kind of "Wink" on and off for lack of a better description. At first I thought it might only be in the editor so when I was finally able to get a web player version exported to test I noticed it still did this strange "Winking" in and out?? So I may have to just NOT use the haze in that level. :(
• When I was finally able to get a web player version exported my file size is now a whopping 60 MB in size!! How the hell is anybody ever supposed to play that on line?? I went through and optimized my textures to a low a resolution as I could before they start to look really crappy, I've nothing bigger that 1024 X 1024 and 512, 256 and smaller wherever I can get away with it. My music is all set to "Stream From Disk" except for my sound effects (I'm not sure what the recommended practice is for small sounds like that)

So those are my BIG GIANT ISSUES right now other wise you fine and somewhat patient folk would be having a good go at level 02 of my game by now :( I can attempt to upload the 60 MB file and see if that works but I just can't see that.

The other issue is that blasted "Load Bar" which I still can't seem to find any help on whether or not it's doing what it's supposed to which I don't think it is because it does not go all the way to the end, it just suddenly loads the game after only moving a little ways along?!? Should it not go all the way to the end at a certain speed to indicate how much of the game is remaining to be loaded?!? At least the freaking load bars I've seen perform that way!!

Sorry for the rant it's just so many things about these projects tend to REALLY piss me off and frustrate the living crap out of me.

Feedback from Deviant Art

I was checking out my "Deviant Art" this morning and got some feedback on my game from another DA member and figured I'd share it here as it's here that it would do the most good I feel.

~RealTimeBrush2 hours ago

An interesting little game but I believe there are some problems with it in my opinion.

1) The controls are difficult to use, the independent camera rotation and movement takes quite some getting used to, I 'suspect' with its casual nature and delivery people may not give it the time to get used to the controls.
2) The way the character circles when reversing makes it impossible to backup if you get too close to the edge of a rock or platform. I found alignment with the jump target difficult with the degree of turn too.
3) Even in this demo the lack of a save or check point is quite frustrating. In the puddle again back to the start.

 

 

I agree with a lot of what the poster has said and I do sort of have plans to change a lot of these issues as the game develops. That having been said, while testing out the game I've gotten quite used to the way the controls work and myself using the keyboard controls which in my opinion are no match for a good control pad with dual controls for both player and camera. I've had no problem learning how the character works and have adapted just like any player would to any game situation or play type scenario. I've played plenty of games that I hated the way the controls worked. For instance the original Mario on regular Nintendo I just hated that the character did no stop on a dine, that he would kind of keep moving after he landed. I eventually got used to it but at first I just hated it. I really loved the Super Nintendo versions of Mario that cam out much later. And even though I've only played it once the 3D Mario I loved. It's the 3D Mario that my game is basically based off of BTW ;) At least as far as character control and independent camera controls go. And yes it does take a bit of getting used to. But that can be said for so many games yes? I personally think it just adds to the challenge of the game. I find that when I'm just testing it out I can't help but keep playing even if I dye in a puddle it's like "Oh Drat!! I gotta do that again!!" And off I go to try for that key again.... "What am I doing?!?" I keep saying to myself... I only wanted to test out my new Bug Splat effect near that far Hibachi BBQ! Doh... But yeah, what happens in most games, you die because you mucked up, you start over right? At least in most of the games I've played. But he is certainly right about a save point about half way up the level... I can do level 01 usually with no problems but an auto save point of some kind about half way up would be pretty handy I would imagine... and who knows... maybe I'll make one, maybe not??

Potato Beetle Damage

FINALLY!! Some headway today! With Chad Walker's help from "Walker Boys Studio" I was able to get my Potato Beetle characters to take two hits from bud before they are killed. The first hit makes them do a nice little gooey blood spurt and then they look damaged, the 2nd hit kills them with a bigger blood splash and they leave behind a nice gooey mess. I'm using a projector for that still as it makes the blood splat go over the bumpy terrain more effectively than the instantiated plane with a transparent texture map that I was using several weeks back on my enemy worms. So that little bit is done, took me all day to figure it out. Code stuff that an experienced coder would just buzz through in seconds takes me all day to figure out Grrrr...!! Oh well... we live and learn ;)

Level 02 Additions and Optimization

Sorry I didn't post an update yesterday but I was swamped trying to figure out some stuff. First it took me the better part of the day to work on and then texture map my exit door area for level 02 of my game. Not sure why really, I had made a good start on the actual model before going to bed on Thursday night so basically all I had to do was add a few more details and then texture map it but the texture mapping too quite a while to do for some reason. Finally when that was done I managed to make it so you have to jump on the "Potato Beetles" twice in order to kill them. I had some great help from Chad Walker of "Walker Boys Studios" on the scripting for that, he pointed me in the right direction and I was able to get it so you jump on the beetle once and you get a nice enemy pain sound a "Squishy" bug blood spurt sound as well and then on the 2nd jump he splats and leaves behind a nice gooey mess.

I had some other issues with Unity Crashing on me every time I tried to save out as a web player version. I kept getting some "Fatal Memory Error message" and then Crash!! I think it might have been due to a lot of the massive 2200 sized texture maps I had imported into Unity, I'm so used to working in the print industry where you always need the highest resolution images possible that sometime it's difficult for me to think in terms of "smaller is best" when it comes to game engines. I just always want to see super sharp detail in my textures. So I expect a good deal of the morning making then no bigger that 1024 X 1024 and smaller wherever I could get away with it.

Above Right: you can see "Bud the Spud" about to head across the final deadly mud bog in level 02 towards the exit. It's kind of had to see in this screen capture as I wanted to show the path he must take in order to get there. I promise I'll post a good shot of the level exit area later on today. But first I want to see in on my "Potato Beetle" I can make it so that after Bud has jumped on him the first time he will look damaged. Chad Walker had mentioned in his email that a change in the texture map material might be a way to go, and I have seen that done before, I just need to figure out how that is done.

Final Mud Bog Areas in Level 02

I finally got the final two deadly mud bog areas worked out in level 02. Here we can see Bud the Spud standing on top of a tin foil wrapped potato baking on the Hibachi overlooking one of the final mud bogs. You can see the key sitting on the cinder block in the middle of the bog, you can also see an extra health potato leaf pick up item as well hovering in the air over another cinder block below. In the next image you can see it as well.

In this screen capture you can see Bud the Spud has made his way onto the cinder block in the middle of the deadly mud bog and is about to grab the final key. I made these jumps a lot simpler as I know retrieving the first key from the mud bog located across the paving stones is a much more difficult jump series, getting across the first few rocks is no problem but landing on that toadstool in the middle of the bog takes a bit of practice I found. So I figured I'd give my players a bit of a break with this 2nd key retrieval scenario. There is one more mud bog to cross on the way to the exit pipe which I've still yet to work out. I'm thinking maybe perhaps a grungy wooden board in front of the pipe like a crude wall with a small door located at the mouth of the pipe with crudely painted text that says "EXIT."

I've still yet to add some direction signs and maybe those helpful butterflies I was talking about in an earlier post. I might try and do those with a particle system that has animated particles just like the Fire flies in the Underground level. Perhaps I'll see if I can get to that tonight. Oh as you can see I did make that "Drainage Pipe" I was telling you about to help justify why the Bud cannot jump off other right side of the wall, I think it turned out very well and does the job pretty good ;)

Potato Beetles Added to Level 02

I've been working hard on getting the Potato Beetles into Level 02. Could not figure out how to get my characters to work with the Way Points. The Walker Boys Scripts are set up way different than how I'm used to with my "Alien Zombies" project which was based off of the first person shooter tutorial on Unity 3D's web site. So for now I'm just going to have to settle for them working the same way the worms do in level one, on the plus side though at least I can adjust character speed, damage and a whole bunch of other stuff to make them a bit more of a challenge.

I have them placed here and there on top of the brick topped wall in the yard. These guys dish out 35 damage to Bud the Spud and are a lot quicker than the Worms. I have a few in the grass along with a few Worms as well. I was trying to figure out also how to make it so Bud would have to jump on a Beetle twice in order to kill it but so far no luck on that, more script studying is definitely in order. I did give him a more juicier "Splat Death" for when Bud does jump on them, it's quite tasty looking as you can see below. You especially have to love it if you kill one right by the edge of the wall. Because I'm using a projector it looks like his blood splatted all over the edge of the wall and ran down the face of the wall to the ground below, very yummy looking if you ask me ;)

One more thing I want to try and do today before calling it a day is do a drainage pipe running along the top of that last third brick topped wall to justify the character not being able to jump off the right side of the wall back into the yard. If I can get that done before bed time I'll be a happy little maniac lol ;)

Potato Beetle Testing & Set Up

OK I've made my animation for the Potato Beetle, they are pretty simple nothing too complicated. I was checking out some insect footage on YouTube last night before I called it a day and hit the hay to check out a little about how beetles actually walk. I've got something pretty close I feel. I gave him his attack animations, idle state, die, target enemy, run, and walk. So that part is done. I've set up his character controller and added his foot effects for when he walking on various types of surfaces his feet will make sounds and kick up a little dust as he moves. I gave him his blob shadow projector and assigned his enemy controller script. I'm trying to figure out his Auto way points because ideally I would like this lil guy to wander back and forth between two point across the wall tops in level 02 and attack Bud when he gets near. Right now it seems like that if I assign the way points script he ignores his attack range and leaves bud alone except to run right over him like a run away truck! lol If I remove the way points script then he performs just as he is supposed to from an "idle state." Hmmmm I think I might have to take a look at how I did the AI in my "Alien Zombies" game which is on temporary hold right now until I can get some help with that project as it's super complicated compared to my "Bud the Spud" game.

But yeah, just gotta work out those little issues which I think are minor and I'm hoping to have this lil guy placed into Level 02 by the end of the day. I have to make a nice bug splat for him just like the worms but different, bigger and juicier if ya know what I mean ;)

Cartoon Potato Beetle

Just finished the texture mapping for the Cartoon Potato Beetle which is Bud's new enemy to deal with in level 02. Just like all of the other characters I've given him a decidedly hand painted texture map. I'm just now in the process of giving him Bones in Max 8 and rigging him for animation. I thought I could use a Biped, I was pretty sure there was a horse or dog biped option but buggered if I could find it, character rigging and animation is not really my strong spot. lol

I ended up just creating individual bones so I'm hoping that will work. Once I get him rigged I'm going to scope out YouTube for some insect footage and see if I can determine how six legged insects walk so I can better mimic his motion in Max 8. It does not have to be exact, in fact if he's a little more original and animated when I'm done that will be perfect as it will give him a more characteristic walk I figure.

Next will be his attack animations and killed animation which will no doubt precede the "Splat" when "Bud the Spud" jumps on him for a nice meaty "Squish!" Then will come the scripting in Unity 3D and character controller so he'll be able to perform his animations and interact with his environment.

Cartoon Potato Beetle WIP

A sneak peek at the Cartoon Potato Beetle I'm developing for my "Bud the Spud Game." Just a WIP right now but he's starting to shape up nicely, big and plump just the kind of thing Bud will want to squish when he jumps on them just like the Worms in level 01.

I've never animated a beetle or anything with six legs before so I'm sure this is going to be fun. I have a few ideas on how insects actually walk but I'm not sure, maybe there is some video on YouTube I can study to get a better clue as to how I should have this lil guy move. I do need to make his antenna and texture him fist before I get into the whole rigging him and animating bit. I'm going to try and use another Biped as I seem to have better luck with those that fiddling about with the bones option, I never seem to get the hang of it right. But I'm pretty sure I should be able to use a custom biped and just move things around a bit.

Character BlockerWalls

I added some more eye candy to the scene in the form of these functional "Character Blocker Walls." I originally thought just having the bushes there was justification enough for why the character could not go over the other side of the wall but it just seemed kind of funny when I was testing out the game so I thought maybe I need some kind of fence or railing, or wood structure, maybe even more brick walling that is higher in the back, just something to really justify the characters restriction of movement within his 3D environment. So I came up with these boards of wood mounted to the back of the wall on long metal posts. I got the idea when I was out for my walk and looking at various fences in people's yards. I remembered seeing something like this last year when I was out on my bike doing some garage sale hunting last summer and thought; "Yeah... that's what I need here." It works very well for this portion of the wall but over on the 2nd Hibachi BB Q that Bud will have to cross on the 3rd wall I have it on one side but I need to come up with some way to justify restriction of not being able to go off the other side of the wall?? Maybe a drainage pipe or something?? Not yet sure on that.

I need to start making the "Potato Beetle" as they are introduced in this level as a new enemy for "Bud the Spud" to have to deal with. I also need to make a few bricks to use as character blockers in some areas as well like in behind the backs of the Hibachi BB Q's.

Level 02 Mud Bogs

I've added a couple of deadly mud bogs to level 02 and worked out the positioning and scenario for getting the first key, it's located on the big rock in the middle of the mud bog on the right. This is another tricky jump. The first three stones are pretty easy but getting onto the toadstool is a tricky jump. Once you have the key getting back is much easier, you just have to jump onto the toadstool and the stones just right and you are home free.

The other mud bog right now just serves the purpose of confining the player the the game environment, although I could place something in the middle of that bog too, maybe an Extra Life Heart perhaps?

I also worked out the scenario for using the Soccer ball to get onto the thirst brick topped wall. Bud will have to push the ball over to the wall and then jump onto the Soccer ball and leap onto the top of the wall. Pretty easy but it might take some players a little time to figure that out, which is a good thing ;)

In the underground level I was using the "Fire Flies" to give players clues as to where to go or hints that something interesting was close by, but above ground in the day light fire flies would be out of place, so I'm trying to thing of something similar, maybe butterflies perhaps??

Bud the Spud with Baked Potatos

Here we can see "Bud the Spud" safely standing on a tin foil wrapped Potato baking on the Hibachi. This is the ONLY safe way to cross the BB Q's one step on those hot grills and it's one big burn out for "Bud the Spud." Just like his Mud bog death I'll have to make a nice "Burning Death" for when he ends up on a hot grill. Maybe something like he runs around in a frantic circle until he busts into flame and then turns into a pile of ash lol :)

You can see a little more of the yard in this screen capture. Also note the Soccer ball on the grass in the background. Bud will need this ball in order to get on top of the next wall. ;)

Bud the Spud and Tin Foil Box

As "Bud the Spud" navigates his way across the top of the garden wall he'll not only come across the Hibachi BB Q's but also boxes of tin foil, a grim reminder that his fellow Potato people are being turned into Baked Potatoes. He'll even have to jump on Baked Potatoes in order to safely get across each BBQ. I still have to make the tin foil wrapped Baked Potatoes, but when I do and add them into the game scene they will cry out in pain each time Bud jumps on one. It's a little twisted I know but then again I like things with a little twisted humor ;)